[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

Multilayer effects in liquid adsorption chromatography with mixed mobile phases

This paper describes the theory of liquid adsorption chromatography (LSC) with mixed mobile phase, involving formation of multilayer surface phases. An equation describing the dependence of the capacity ratio upon the mobile phase composition is derived and theoretical curves illustrating the same dependence are calculated accordingly by assuming different thicknesses of the surface phase.     

New generalized computations of quasi-planar waveguides characteristics

An efficient hybrid field solution to the general multilayer substrates transmission line problems with full shielded and half open cross-sectional geometry is presented by using the waveguide modes coupling and decoupling procedure in the spectral domain. Modal transverse transmission lines corresponding to the LSE and LSM modes are taken into account so that the Green's elements for the edge conditions can be derived by a simple iterative method. In this paper, we analyze not only the propagation constants and characteristic impedances but also the available transmission power capacity and power distribution of most commonly used structures. Normalized eigenmode power levels characterizing the propagation features are computed.     

Influence of polyelectrolyte coating conditions on capillary coating stability and separation efficiency in capillary electrophoresis

Polyelectrolytes are widely used in capillary electrophoresis as coating agents of silica capillaries to prevent adsorption phenomena and improve the repeatability of peptide and protein analysis. A systematic study of the coating experimental conditions has been carried out to optimize coating stability and performance. The main experimental parameters studied were the type and concentration of polyelectrolytes used in several monolayer and multilayer coatings, the ionic strength of coating and stabilizing solutions, and the procedures used for coating and capillary storage. Electroosmotic flow magnitude, direction and repeatability were used to monitor coating stability. Coating ability to limit adsorption was investigated by monitoring variations of migration times, time-corrected peak areas and separation efficiency of test peptides. Capillary-to-capillary and batch-to-batch reproducibility was also studied. In addition, the separation performance of polyelectrolyte coatings were compared to those obtained with bare silica capillaries.     

X7R型MLCC流延瓷膜显微结构的AFM研究

片式电容是由电介质陶瓷薄膜和内电极相互重叠而成的多层独石结构,又称多层陶瓷电容器(mul-tilayer ceram ic capacitors,简称MLCC)。具有体积小、内部电感低、绝缘电阻高及漏电流小、介质损耗低、价廉等优点,被广泛应用于各种电子整机中的振荡、耦合、滤波和旁路电路,尤其是高     

Influence of assembling pH on the stability of poly(L-glutamic acid) and poly(L-lysine) multilayers against urea treatment

Polyelectrolyte multilayers of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) were built up using the layer-by-layer (LbL) technique in low pH (3.6, PM3.6) and in neutral pH (7.4, PM7.4) solutions. The multilayers were then treated with a concentrated urea (one kind of denaturant for proteins and polypeptides) solution (8M) and rinsed with corresponding buffer. The buildup and treatment processes were investigated by ultraviolet visible spectroscopy and ellipsometry. The surface morphology was observed by scanning force microscopy (SFM). The inner structures were determined by X-ray reflectometry and circular dichroism spectroscopy (CD). An exponential growth of the optical mass and the layer thickness was observed for both PM3.6 and PM7.4. After urea treatment, a significant mass loss for PM3.6 was found, while no mass change was recorded for PM7.4. The dominant driving force for PM7.4 is electrostatic interaction, resulting in multilayers with an abundant beta-sheet structure, which has higher stability against urea treatment. By contrast, the dominant driving force for PM3.6 is hydrogen bonding and hydrophobic interaction, which are sensitive to the urea treatment. The mechanism is substantiated by molecular mechanics calculation. This has offered a convenient pathway to mediate the multilayer properties, which is of great importance for potential applications.     

Hybrid genetic algorithm–tabu search approach for optimising multilayer optical coatings

Constructing multilayer optical coatings (MOCs) is a difficult large-scale optimisation problem due to the enormous size of the search space. In the present paper, a new approach for designing MOCs is presented using genetic algorithms (GAs) and tabu search (TS). In this approach, it is not necessary to specify how many layers will be present in a design, only a maximum needs to be defined. As it is generally recognised that the existence of specific repeating blocks is beneficial for a design, a specific GA representation of a design is used which promotes the occurrence of repeating blocks. Solutions found by GAs are improved by a new refinement method, based on TS, a global optimisation method which is loosely based on artificial intelligence. The improvements are demonstrated by creating a visible transmitting/infrared reflecting filter with a wide variety of materials.     

Stimuli-responsive multilayer chitosan hollow microspheres via layer-by-layer assembly

Novel stimuli-responsive multilayer chitosan hollow microspheres with chitosan as the unique component have been fabricated by the sequential layer-by-layer electrostatic assembly technique from the sacrificial templates (polystyrene sulfonate, PSS) with chitosan (CS) as the polycation and carboxymethyl chitosan (CMCS) as the polyanion, respectively. Their hollow structure was confirmed by the TEM analysis. The DLS analysis indicated that the multilayer chitosan microcapsules were pH and ionic strength dual-responsive. Due to the biocompatibility of the single component chitosan used, the multilayer chitosan microcapsules are expected to be used in the controlled release of drugs.     

树状高分子溶液在粘度计毛细管表面的吸附现象

本文测定了树状高分子DAB(PA) n 水溶液和脂肪族超支化聚酯及其硅烷化衍生物溶液性质 .通过粘度测量 ,得到了吸附常数k ,半数吸附浓度ca,分子间缔合常数Km ,特性粘度 [η]等参数 ,解释了特性粘度的反常行为 ,重点研究了吸附现象 .发现树状高分子和超支化高分子溶液在粘度计毛细管表面形成了多层吸附 ,高分子之间的相互作用及高分子与溶剂分子间的氢键作用是形成多层吸附的重要原因     

溅射气压对X射线多层膜反射率的影响

本文在不同的溅射气压的情况下制备了具有相同结构参量的Mo/Si多层膜,测出了其对应的小角度X衍射曲线,在北京同步辐射实验室测量了多层膜的软X射线反射率.小角X射线衍射谱表明:随着溅射气压升高,多层膜的小角X射线衍射曲线的高次峰的峰高急剧变小,半峰宽变大.反射率测量结果也表明:多层膜的X射线反射率随溅射气压的升高而急剧降低.